GLR-V80 — V80 Africa Low Pressure LPG Regulator with Gauge

Home / Pressure Reducers / GLR-V80
⚡ Quick Answer

The GLR-V80 is a V80 Africa Low Pressure LPG Regulator with Gauge manufactured by Ningbo Global Hardware Co., Ltd. (brand: Global Cylinder) at its factory in Cixi, Ningbo, China. Inlet Pressure 0.3 – 16 bar; Outlet Pressure 30 mbar (28–35 mbar adjustable); Flow Rate 1.5 kg/h. It is certified to EN 16129 and ships with a minimum order quantity of 2000 pcs. Typical lead time is 25–35 days for a full container load.

V80 Africa Low Pressure LPG Regulator with Gauge for Venezuela market - Ningbo supplier Made in China LPG gas cylinder wholesale
Certifications EN 16129
Pressure Regulators

V80 Africa Low Pressure LPG Regulator with Gauge

Model: GLR-V80 MOQ: 2000 pcs Brand: Global Cylinder

Low pressure LPG regulator with built-in gauge. Africa market specific. Multiple national standards.

  • Integrated pressure gauge shows remaining cylinder pressure
  • Pressure-relief valve protects the downstream hose
  • Nitrile diaphragm resistant to LPG and butane
  • Threaded hose spigot with barb for secure clamping
  • Calibrated and leak-tested individually before packing
🏭 Source factory — no middleman 📄 Full test reports & certificates 🚢 15+ years export experience

Product Overview

The GLR-V80 is a low-pressure regulator with an integrated pressure gauge, developed for the African market where cylinder-exchange customers need to see at a glance whether a cylinder still has usable gas. The gauge removes the guesswork and the shake-the-cylinder ritual, and reduces premature cylinder returns.

The regulator body is die-cast zinc alloy with a nitrile rubber diaphragm, and the outlet is a standard 8 mm hose spigot. A pressure-relief valve is integrated into the body to protect the hose in the event of a downstream blockage.

Technical Specifications

All figures are nominal values measured at 15 °C unless otherwise stated. Tolerances comply with the referenced standard.

GLR-V80 technical specification table
Inlet Pressure0.3 – 16 bar
Outlet Pressure30 mbar (28–35 mbar adjustable)
Flow Rate1.5 kg/h
Body MaterialDie-cast zinc alloy
DiaphragmNitrile rubber (NBR)
Outlet8 mm hose spigot
GaugeIntegrated, 0–16 bar
SafetyIntegrated pressure-relief valve
StandardEN 16129
MOQ2,000 pcs
CertificationEN 16129
Production Lead Time25–35 days after deposit
Port of LoadingNingbo / Shanghai, China
PackagingStandard export carton or pallet, OEM packaging available

Applications & Markets

  • Household LPG cooking
  • Cylinder exchange programmes
  • Small restaurant kitchens
  • Portable LPG appliances

Frequently Asked Questions

What outlet pressure does the GLR-V80 deliver?
The nominal outlet pressure is 30 mbar, adjustable between roughly 28 and 35 mbar. 30 mbar is the standard for butane and LPG appliances in most African and European markets. If your market operates at 37 mbar (typical for propane in the UK and Ireland), we supply that variant with the same body.
How do I test the regulator for leaks after installation?
Apply a soapy-water solution to every threaded and hose joint with the cylinder valve open and the appliance closed. Any leak will produce a steady stream of bubbles. Never use a flame to check for leaks, and if a leak is found at a hose joint, replace the hose rather than tightening the clamp repeatedly.